EMT Conduit(UL797/UL6)

Production standard: UL 797 and UL 6

UL797(EMT)specification:

Galvanized Steel Electrical Metallic Tubing(EMT) is made of high quailty hot dipped galvanized steel coil according the standard of UL 797. The interior surface of our EMTconduit is free from defect with a smooth welded seam. Our EMTconduit has a uniform zinc coating insuring metal to metal contact and galvanic protection against corrosion. The exterior is protected by a clear water based coating. The interior surface is coated with primer to provide smooth continuous raceways for easy and fast wire pulling. Our EMT Conduit(UL797/UL6) has excellent ductility, providing for uniform bending and cutting.

Dimension and Weight Chart

Trade Size		Nominal Wt. per 100Ft(30.5M)		Nominal Outside Diameter		Nominal Wall Thickness
U.S.	Metric	Lbs	Kg	In.	mm	In.	mm
1/2	16	30	13.5	0.706	17.93	0.042	1.07
3/4	21	46	20.7	0.922	23.42	0.049	1.24
1	27	67	30.6	1.163	29.54	0.057	1.45
1-1/4	35	101	45.6	1.510	38.35	0.065	1.65
1-1/2	41	116	52.8	1.740	44.20	0.065	1.65
2	53	148	67.2	2.197	55.80	0.065	1.65
2-1/2	63	216	97.9	2.875	73.03	0.072	1.83
3	78	265	120.0	3.500	88.90	0.072	1.83
3-1/2	91	348	158.0	4.000	101.60	0.083	2.11
4	103	392	178.0	4.500	114.30	0.083	2.11

Applicable Tolerances:
Length: 10Ft (3.05m) ± ¼” (±6.35mm).
Outside Diameter: ½”-2” ±0.005” (±0.13mm); 2½” ±0.010” (±0.25mm); 3” ±0.015” (±0.38mm); 3½”-4” ±0.020” (±0.51mm)

UL6（EMT）specification:

Sonitic Conduit Rigid is manufactured from high-strength steel coil, and produced according to the standard of UL6(Hot Dip Galvanized Rigid Steel Conduit). The interior surface of our conduit is free from defect with a smooth welded seam. It is hot dipped galvanized inside and outside, so that metal-to-metal contact and galvanic protection against corrosion are provided,and the furface of the conduit is coated with a clear lacquer coating to inhibit white rust and increase corrosion resistance. And the conduit is threaded on both ends, with a coupling applied to one end and a by size color coded thread protector to the other as per table. The interior surface provides a smooth continuous raceway for easy wire pulling. Our conduits ductility characteristics provide for easy bending, cutting, and threading in the field.

Dimension and Weight Chart

Trade Size		Nominal Wt. per 100Ft(30.5M)		Nominal Outside Diameter		Nominal Wall Thickness
U.S.	Metric	Lbs	Kg	In.	mm	In.	mm
1/2	16	82	37.2	0.840	21.3	0.104	2.60
3/4	21	109	49.44	1.050	26.7	0.107	2.70
1	27	161	73.03	1.315	33.4	0.126	3.20
1-1/4	35	218	98.88	1.660	42.2	0.133	3.40
1-1/2	41	263	119.30	1.900	48.3	0.138	3.50
2	53	350	158.76	2.375	60.3	0.146	3.70
2-1/2	63	559	253.56	2.875	73.0	0.193	4.90
3	78	727	329.77	3.500	88.9	0.205	5.20
3-1/2	91	880	399.17	4.000	101.6	0.215	5.50
4	103	1030	467.21	4.500	114.3	0.225	5.70
5	129	1400	635.04	5.563	141.3	0.245	6.20
6	155	1840	834.62	6.625	168.3	0.266	6.80

Applicable tolerances:
Length: 10Ft (3.05m) ± ¼” (±6.35mm).
Outside Diameter: ½”-2” ±0.015” (±0.38mm); 2½”-4” ±0.025” (±0.64mm); 5”-6” ± 1%

Top